ICON A5 MM : Equipment and Furnishings : Equipment and Furnishings General Maintenance : Garmin G3X and Autopilot Bezel Removal
Garmin G3X and Autopilot Bezel Removal
100062-00
Use the following procedure to remove the Garmin G3X and Autopilot Bezel.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
05—Equipment and Furnishings
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove 2x screws from nutplates and center console. (Figure 78)
2. Remove 4x screws from G3X Bezel. (Figure 77)
3. Remove G3X Bezel.
Verification Method
The procedure is complete when G3X Bezel has been removed.