ICON A5 MM : Electrical System : Bilge Pump : Inspection Instructions : Bilge Pump Removal
Bilge Pump Removal
100067-00
Use the following procedure to remove the bilge pump.
Applicable Aircraft Serial Numbers
00001-00020
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
03—Electrical System
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the fuel tank. (Remove Fuel Bladder)
2. Remove the fuel tank mounting structure if unable to perform the below steps with it installed.
3. Reaching down behind the fuel tank mounting structure, disconnect the bilge pump hose from the pump by loosening the hose clamp and pulling the hose off the pump’s barb.
4. Cut the cable tie attaching the pump to the carbon saddle.
5. Twist the pump to break it free from the adhesive and disconnect the pump body from the bottom strainer by depressing the lock button and turning counter clockwise.
6. Remove the pump body and bottom strainer.
Verification Method
The task is completed when the bilge pump has been removed.