ICON A5 MM : Instruments (and Avionics) : VHF Comm Antenna : Maintenance Instructions : Comm Antenna Removal
Comm Antenna Removal
100097-00
These instructions are to be used to remove the comm antenna for transportation or repair.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
Owner/Pilot
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
The comm antenna is located on top of the horizontal tail.
Task Instructions
1. Remove antenna 4 8-32x1.00 screws.
2. Raise the antenna from the horizontal tail surface to disconnect the BNC connector.
Verification Method
This task is complete when the comm antenna has been removed from the aircraft.