DAC Memory Unit Removal
100121-00
The
A5 contains a memory unit that records data from operations. Use this task to remove the DAC memory unit.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
2mm long-reach hex head wrench
Parts Required
None
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove left side instrument panel cover (ICA001703) by carefully lifting up on the aft edge of the cover to release the ball mounts from the rubber sockets. The cover’s forward edge is retained by a plastic pin that slides aft out of a receptacle. Set the cover aside.
2. Locate the DAC912iS (ICA010394). It is mounted to the forward face of the right-side instrument panel and can be reached through the instrument panel cover opening.
3. Remove the DAC memory unit (a 1 x1 x 2 inch cube) by removing the four retaining screws using a 2mm long-reach hex wrench. Use care to avoid dropping screws. Retain the screws for re-installation.
Verification Method
Task is complete when DAC memory unit has been removed.
Parent topic
Related tasks