Extraction Rocket Inspection
100167-01
Use the following tasks to inspect the extraction rocket system.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
16—ICON Parachute System (IPS)
Safety Equipment
As Needed
Consumables
None
Warning:
Contact ICON Support before beginning maintenance.
Task Instructions
1. Ensure the detent pin with the “REMOVE BEFORE FLIGHT” flag is installed into the activation handle.
2. Check the security of the Rocket to the Rocket Mount (both fasteners in the base must be secure).
3. Ensure the carbon fiber Rocket Mount to which the Rocket Motor is attached is also secure (can be confirmed by means of loading the mount by hand from underneath and observing any movement indicative of loose Rocket Mount attach fasteners).
4. Check the security of the Rocket Mount to the Engine Bay Closeout (both fasteners in the base must be tight).
Verification Method
All extraction rocket mounting hardware is properly secured.
Parent topic
Related tasks
Related information