Wing Bonded Joints, Cracks, or Delaminations
100318-00
The following is to be used for inspecting the wing bonded joints, cracks, or delaminations.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
Borescope
Parts Required
None
Aircraft System and Number
14—Wing
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove all wing access panels (4).
2. Fold wings to expose wing fold tube.
3. Do a visual inspection through the wing fold ribs and access panels.
4. Using a borescope, flashlight, and viewing mirror as appropriate, visually inspect all accessible bond lines for cracks or damage.
Verification Method
Any cracks found should be investigation further. Do not fly the airplane and contact ICON for further instructions.
Parent topic