ICON A5 MM : Flight Controls : Flap Controls : Maintenance Instructions : Install Flap Actuator
Install Flap Actuator
100338-00
These instructions should be used to install the flap actuator.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ME001018-FLAP ACTUATOR
Aircraft System and Number
06—Flight Controls
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Install replacement flap actuator by securing it to the flap actuator bracket using the retained AN41C0A bolt. Take care to install the flap actuator in the correct orientation, with the spherical bearing/lug between the bracket walls.
Note: 
See Figure 126 for installation reference.
2. Connect flap actuator rod end to the flap bellcrank using the retained AN4C10A bolt and NAS1149C0416R washer.
Note: 
See Figure 126 for installation reference.
3. Connect the flap actuator to the wire harness.
4. Set actuator limit switches. (Rigging Flap Controls)
Verification Method
Verify actuator limit switches against Flaps Rigging. (Inspect Flap Rigging)