Nose Landing Gear (NLG) Wheel Installation
100434-00
Use the following procedure to install the nose landing gear (NLG) wheel.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
ICA009749 (WING HARD JACKING POINT)
Parts Required
AV-ICON-002 (AXLE, WHEEL, NLG)
ICA011894 (SPACER, AXLE, NOSE WHEEL)
2X AN4C11A (BOLT, MACH, CRES, .250-28X.688))
Aircraft System and Number
11—Landing Gear
Safety Equipment
As Needed
Consumables
LOCTITE® 243™
Start this procedure with a complete Beringer nose wheel and tire assembly (see Beringer Wheel and Brake Maintenance Manual).
Task Instructions
1. Slide the AV-ICON-002 axle into the wheel assembly.
2. Slide the ICA011894 spacer onto the end of the axle.
3. Position the wheel assembly into the NLG fork.
4. Apply LOCTITE® 243™ to the threads of the two AN4C11A bolts and install them through each leg of the NLG fork and into the axle. Torque each to 44 in-lbf.
5. Lower the aircraft from jacks or remove weight as appropriate.
Verification Method
Check that the wheel spins freely and that tire pressure is correct (45 psi).
Parent topic
Related tasks