ICON A5 MM : Landing Gear : Brake Line : Maintenance Instructions : Parking Brake Valve Replacement Procedure : Parking Brake Valve Removal Procedure
Parking Brake Valve Removal Procedure
100451-00
Use the following to remove the parking brake valve.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
11—Landing Gear
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Unless already performed, remove any interior panels needed to gain access to the parking brake valve.
2. Remove bolts and neoprene washers from parking brake valve.
3. Remove AFT brake lines from parking valve. Use a wrench to hold the fitting on the forward port of the parking valve, then a 1/2” wrench to disconnect the B-nut of the brake lines at the parking valve.
4. Cap or plug the openings to minimize fluid loss.
Verification Method
Verify that the parking brake valve is fully removed.