ICON A5 MM : Instruments (and Avionics) : Garmin G3X Touch™ : Maintenance Instructions : Remove ADAHRS
Remove ADAHRS
100487-00
Use the following procedure to remove ADAHRS.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
This procedure requires a pitot-static leak test. (Pitot-Static-AOA Leak Test Procedures)
Task Instructions
1. Remove cluster hood shell by pulling upon the aft side and sliding hood towards the aft of the aircraft.
2. If necessary, remove Left Instrument Top Panel. (Left Instrument Panel Top Panel Removal)
3. Disconnect D9146P and D9147P connectors from the ADAHRS.
4. Disconnect 2x Static Air Lines and 1x Pitot Air Line.(Figure 243)
5. Remove #10 screw and washer.
6. Remove ADAHRS from the aircraft.
7. If replacing ADAHRS, unscrew the 1/8 NPT Push-On Connectors form the ADAHRS.
Verification Method
The task is completed when the ADAHRS has been removed.