Remove Engine Indication System (EIS)
100500-01
Use this procedure to remove the Engine Indication System (EIS).
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove cluster hood shell by pulling upon the aft side and sliding hood towards aft aircraft.
3. Disconnect connectors D9144P and D9145P from the EIS. (Figure 244) 4. Remove the #10 screws and remove the EIS. If necessary, disconnect D9010J.
Verification Method
Task is complete when the EIS has been removed from the aircraft.
Parent topic