Remove Microphone or Headphone Jack
100520-00
Use the following procedure to remove the LH or RH microphone or headphone jacks due to failure.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove center armrest.
2. Remove center console bucket.
3. Disconnect the electrical connections and remove. Label the wires for later installation. The connections are: Cigarette lighter connectors—T9117(+) and T9119(-); USB power connectors—T9120(-) and T9116(+); Aux audio in jack—D9063P.
4. Disconnect connectors from headphone or microphone jacks.
a. D9073P connects to D9073J on microphone jack.
b. D9074P connects to D9074J on headphone jack.
c. D9075P connects to D9075J on microphone jack.
d. D9076P connects to D9076J on headphone jack.
5. Remove nuts and remove the failed jacks and discard.
Verification Method
Microphone or headphone jack has been removed.
Parent topic