Remove Seawings™ Platform Tip
100575-00
Remove Seawings™ platform tip. The tips are designed to be readily replaced in case of damage.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
08—Fuselage and Vertical Tail
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Use a 3/8 wrench to remove the single AN3C5A attachment bolt and two NAS1149C0363R washers from inside the wheel well. Retain hardware for installation. (Install
Seawings™ Platform Tip) 2. Remove the Seawings™ Tip by applying pressure in the aft direction and rotating up and away from the bottom Seawings™ skin. There are four pins and sockets—two forward and two aft—that will slide apart as the Seawings™ tip is removed. If necessary, use plastic soft scrapers to loosen sealant.
3. Remove the sealant by peeling away from the Seawings™ skin or tip.
4. Inspect the four pins on the Seawings™, verifying that all are securely bonded.
Verification Method
Install new Seawings™ Platform Tip.
Parent topic
Related tasks
Related references