Wing Trailing Edge Light Fence Replacement
100614-00
Use the following procedure to replace the trailing edge light fence.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
14—Wing
Safety Equipment
As Needed
Consumables
None
Note:
Throughout this procedure, apply the methods of the general VHB tape procedure (See Related Information).
Task Instructions
1. Remove the fence and adhesive tape residue from the trailing edge light.
2. Trim 70006436714 black VHB tape to the appropriate flat pattern. The LH patterns are shown, use mirror image for RH patterns.
3. Apply VHB tape in the channel of the fence so that tape lies entirely inside of channel.
4. Install the fence.
Verification Method
The procedure is complete when the trailing edge light fence is installed.
Parent topic