ICON A5 MM : Instruments (and Avionics) : ADS-B GPS System : Maintenance Instructions : Remove G3X ADS-B GPS Receiver
Remove G3X ADS-B GPS Receiver
100604-00
Remove ADS-B GPS receiver. This task is applicable to the Garmin G3X configuration only.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ICA014695 (RECEIVER, GPS, GARMIN ADS-B)
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Locate the GPS RECEIVER on the LH Fuselage Skin, forward of the rudder pedals.
2. Disconnect the D9155J antenna cable and D9137P harness connector.
3. Remove the receive by loosening the three nuts and washers securing the receiver to the bonded studs.
Verification Method
ADS-B receiver has been removed.