ICON A5 MM : Instruments (and Avionics) : Annunciator Panel : Maintenance Instructions : Replace Annunciator Panel
Replace Annunciator Panel
100042-00
The following can be used to replace the annunciator panel.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
LS5000-904 (PANEL, ANNUNCIATOR)
ICA008907 (GRAPHIC OVERLAY, ANNUNCIATOR PANEL)
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Note: 
Retain removed hardware for re-installation.
Task Instructions
1. Remove instrument cluster bezel. (Remove Instrument Cluster)
2. Remove four #4-40 screws attaching annunciator panel to mount.
3. Remove annunciator.
4. Replace with new PANEL, ANNUNCIATOR and re-install four attachment screws. Torque screws to 2-4 in-lb. Check that hardware is secure.
CAUTION: 
PANEL, ANNUNCIATOR is an electrostatic sensitive device. Do not open or handle except at a static-free work station.
5. Remove adhesive backing from GRAPHIC OVERLAY and apply to PANEL, ANNUNCIATOR.
6. Re-install instrument cluster into the aircraft. (Install Instrument Cluster)
Verification Method
Check the operation of the annunciator panel (Annunciator Panel Function)