ICON A5 MM : Recommended Inspections : General Inspection Tasks : Cockpit Panels Removal and Installation : Remove Cockpit Floorboard
Remove Cockpit Floorboard
100091-00
Use this procedure is used to remove the cockpit floorboard.
Applicable Aircraft Serial Numbers
00001-00020
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Lift up on the aft edge of each aft floor board, separating the ball and socket fasteners, then lift up on the forward edge in a similar way. Remove the aft floor board using care so as not to scratch anything.
2. Remove each forward floor board by positioning the rudder pedals at mid-travel, then sliding the forward floor board aft and out.
Verification Method
The task is complete when the cockpit floor board has been removed.