Engine Mount Removal
100150-00
Use the following procedure to remove the engine mount.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Heavy
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
None
Task Instructions
2. Disconnect the two coolant hoses where they attach to the lower water pump fittings as shown in the upper image of Figure 361.
Figure 361. Thermostat shown removed for clarity.
3. Loosen the hose clamp and remove thermostat-radiator coolant hose where it attaches to the lower-right fitting at the thermostat (Figure 362).
Figure 362. Lower-Right Fitting at the Thermostat
4. Remove the six M10 screws that attach the ICA007128 engine mount to the engine case (see Figure 363).
Figure 363. Engine Mount to the Engine Case
5. Retain the associated washers and spacers and remove the engine mount from the engine.
Verification Method
The procedure is complete when the steps have been finished.
Parent topic