Headliner Installation
100252-00
Use this procedure to install the headliner.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Position the headliner in rough position and connect the two headset hanger light connectors.
2. Align and push the headliner up and into place.
3. Install the overhead console bezel by engaging the tabs at the aft edge, then swinging the forward edge up until the spring fasteners snap into place.
4. Push the four light control knobs onto their D-shafts.
Verification Method
Task is complete when headliner is installed.
Parent topic
Related tasks
Related information