ICON A5 MM : Recommended Inspections : General Inspection Tasks : Cockpit Panels Removal and Installation : Baggage Sidewall Panel Installation
Baggage Sidewall Panel Installation
100052-00
Use the following procedure to install the baggage sidewall panel.
Applicable Aircraft Serial Numbers
00021+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
05—Equipment and Furnishings
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Locate the sidewall panel into rough position.
2. Align the four holes with the underlining structure and install the four push-clip fasteners. Pushing their center buttons in flush once in place, will expand their locking feature.
3. Use a T20 Torx driver and 3/8 wrench to install the seat back closeout. Torque 3x fasteners to 25-28 in-lbs.
4. Install the seat belt reels. (Seat Belt Inertia Reel Installation)
5. Install the baggage floors. (Baggage Floor Installation)
6. Install the headliner. Ensure headliner flange is inserted into the U-channel on the top of the sidewall panels. (Headliner Installation)
Verification Method
The task is completed when the baggage sidewall panel has been installed.