ICON A5 MM : Recommended Inspections : General Inspection Tasks : Cockpit Panels Removal and Installation : Seat Belt Inertia Reel Installation
Seat Belt Inertia Reel Installation
100565-00
Uses this task to install the seat belt inertia reel.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Install the inertia reel onto the 5/16 stud at the lower edge of the rear window.
2. Install the 5/16 washer and locknut, align the reel using the seat belt cover as a guide and torque the nut to 85 in-lb.
3. Inspect the seat belt reel cover clips. If any are damaged, replace with new and use .020 safety wire to secure them.
4. Snap the seat belt reel cover into place over the reel.
Verification Method
Procedure is complete when seat belt inertia reel is installed.