ICON A5 MM : Recommended Inspections : General Inspection Tasks : Cockpit Panels Removal and Installation : Baggage Sidewall Panel Installation
Baggage Sidewall Panel Installation
100051-00
Use the following procedure to install the baggage sidewall panel.
Applicable Aircraft Serial Numbers
00001-00020
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
05—Equipment and Furnishings
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Locate the sidewall panel into rough position, then lift its upper edge up so as to engage the two carbon tabs.
2. Align the three holes with the underlining structure and install the three push-clip fasteners. Pushing their center buttons in flush once in place, will expand their locking feature.
3. Install the seat belt reels. (Seat Belt Inertia Reel Installation)
4. Install the baggage floors. (Baggage Floor Installation)
5. Install the headliner. (Headliner Installation)
Verification Method
The task is completed when the baggage sidewall panel has been installed.