ICON A5 MM : Propulsion : Engine : Cooling System : Inspection Instructions : Oil Cooler and Radiator Condition Inspection
Oil Cooler and Radiator Condition Inspection
100306-00
The following should be used for inspecting the oil cooler and radiator for leaks and condition. The engine cowling needs to be removed for this inspection. See Related Information.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
None
Figure 391. Oil system installation with hoses and hardware shown.
Task Instructions
1. Remove engine cowling. (Remove Engine Cowlings)
2. Visually inspect oil cooler and radiator for leaks and condition of hoses.
Use illustrations as a reference for the oil cooler installation with some of its main components.
3. Replace engine cowling.
Verification Method
Acceptable condition of hoses/tubes and leak-free installation provide verification of completion.