Install Garmin G3X Display
100346-01
Use the following procedure to install the Garmin G3X display.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ICA014704 (DISPLAY UNIT, G3X TOUCH, 7 INCH, GDU 450, GARMIN)
4x 6C37KC530 (SCREW, MACH SHCS, 6LOBE, CRES BLACK, 6-32X.375)
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
ICA012078 (LUBRICANT, GENERAL PURPOSE)
Isopropyl Alcohol
Task Instructions
1. Insert the G3X Display unit into the G3X Bezel, and connect to the main harness.
a. Connect the two ports on the G3X Display to D9149P and D9150P on Main Wire Harness.
b. Verify locking features of connector are engaged.
c. Torque screwlocks to 2-4 in-lbs.
Figure 248. G3X Display
2. Using isopropyl alcohol, clean surfaces where lubricant will be applied. Apply lubricant liberally to threads and shanks of 4X screws.
3. Install the 4x screws through the G3X display into the threaded inserts in the G3X Bezel.
Figure 249. G3X Display
4. Torque screws to 6.0-10.0 in-lbs.
Verification Method
Turn on the master switch. Confirm the G3X display is powered and functioning properly.
Parent topic