ICON A5 MM : Equipment and Furnishings : Equipment and Furnishings General Maintenance : Radio Stack Installation
Radio Stack Installation
100363-00
Use the following procedure to install the radio stack of the Garmin G3X and Autopilot only.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
4x 8C50MTT3 (SCREW, MACH TRH, 6LOBE, CRES, 8-32X.250)
Aircraft System and Number
05—Equipment and Furnishings
Safety Equipment
As Needed
Consumables
ICA012078 (LUBRICANT, GENERAL PURPOSE)
Isopropyl Alcohol
Task Instructions
1. Using isopropyl alcohol, clean surfaces where lubricant will be applied. Apply lubricant liberally to threads and shanks of 4x screws.
2. Install radio stack into center console using 4x screws.
Figure 76. Radio Stack
3. Torque screws to 13 in-lbs.
4. Install the throttle handle and bezel. (Throttle Handle and Bezel Installation)
5. Install the center console bucket. (Center Console Bucket Installation)