ICON A5 MM : Instruments (and Avionics) : Garmin G3X Touch™ : Maintenance Instructions : Install IP Center Spine
Install IP Center Spine
100349-00
Use the following task to install the IP Center Spine.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ME000342-C (SPINE, IP CENTER, SUBASSY)
4x 8C50MTT3 (SCREW, TRUSS, 6 LOB, 8-32 X .50, SS316)
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
ICA012078 (LUBRICANT, GENERAL PURPOSE)
Isopropyl Alcohol
Task Instructions
1. Using isopropyl alcohol, clean surfaces where lubricant will be applied. Apply lubricant liberally to threads and shanks of 4x screws.
Figure 250. Center Spine
2. Install IP center spine subassembly with screws as shown.
3. Torque screws to 13 in-lbs.
Verification Method
Verify the installation of the IP center spine is complete.