ICON A5 MM : Instruments (and Avionics) : Garmin G3X Touch™ : Maintenance Instructions : Remove IP Center Spine
Remove IP Center Spine
100513-00
Use the following task to remove the IP Center Spine.
Applicable Aircraft Serial Numbers
00139+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ME000342-C (SPINE, IP CENTER, SUBASSY)
4x 8C50MTT3 (SCREW, TRUSS, 6 LOB, 8-32 X .50, SS316)
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
ICA012078 (LUBRICANT, GENERAL PURPOSE)
Isopropyl Alcohol
Task Instructions
1. Remove 4x screws. (Figure 250)
2. Remove IP center spine subassembly.
Verification Method
Verify that the IP center spine subassembly has been removed.