Install Spinner Dome
100366-00
Use the following task to reinstall the spinner dome.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
Tef-Gel®
Task Instructions
1. Slide dome onto bulkhead and line up orientation marks made during removal.
2. Install the six Torx fasteners with Tef-Gel® and washer stacks in their original unique configuration. Tighten Torx fasteners into locking nut plates and torque to 26 in/lbs with a T20 Torx driver.
Note:
Each aircraft has a unique set of six Torx fasteners and washer stacks. The fasteners and washer stacks must be reinstalled in the starting condition to maintain proper propeller balance.
3. Remove all orientation marks.
Verification Method
The task is complete when the spinner dome has been reinstalled.
Parent topic
Related tasks
Related references