ICON A5 MM : Airworthiness Limitations : Condition Inspections and 100-Hour Inspections : Condition and 100-Hour Inspection—Engine and Propeller
Condition and 100-Hour Inspection—Engine and Propeller
100286-00
Correct all unsatisfactory items prior to flight S=Satisfactory, U=Unsatisfactory
S
U
Comments
1
Inspect engine per Maintenance Manual: (Line Maintenance) for Rotax Engine Type 912 i Series
2
Apply conductive grease to the ignition coil packs. (Grease Coil Pack Connections)
3
Inspect engine mount for wear, cracking, missing paint, general condition. (Inspect Engine Mount)
4
Check engine mount attachments (10 places) are secure. (Inspect Engine Mount)
5
Check for oil leaks from line fittings and oil tank drain valve.
6
Check firewall for condition and coverage (gaps between airframe and firewall)
7
Check oil tank/mounting brackets for security
8
Inspect oil cooler and radiator for leaks and condition (Oil Cooler and Radiator Condition Inspection)
9
Inspect throttle control for proper travel and security (Inspect Throttle Control for Proper Travel and Security)
10
Check exhaust system for attachment, cracks, general condition
11
Check cowling for cracks and condition and security of fasteners. (Install Engine Cowlings)
12
Inspect propeller/hub per the latest Revision of Sensenich 3B0R5 Installation Instructions, verify that hardware is secure
13
Inspect fan and propeller extension, verify that hardware is secure
14
Remove spinner dome (Remove Spinner Dome)
15
Check torque of propeller bolts per latest revision of Sensenich 3B0R5 Installation Instructions
16
Reinstall spinner dome (Install Spinner Dome)
17
Check security and condition of engine grounding wires