Remove Spinner Dome
100527-00
Use the following procedure to remove an existing spinner dome.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
Tef-Gel®
Task Instructions
1. Mark the spinner dome orientation to the bulkhead so it can be reinstalled at the same orientation.
2. Remove the six Torx fasteners with a T20 Torx driver. Document the specific fastener and washer for each mounting hole during removal.
Note:
Each aircraft has a unique set of six Torx fasteners and washer stacks. The fasteners and washer stacks must be reinstalled in the starting condition to maintain proper propeller balance.
3. Slide the spinner dome off in the aft direction.
Verification Method
This task is complete when the spinner dome has been removed.
Parent topic
Related tasks
Related references