ICON A5 MM : Landing Gear : Landing Gear General Maintenance : Landing Gear Actuator Fuse Blown
Landing Gear Actuator Fuse Blown
100390-00
The following procedure is used to determine whether the landing gear actuator has a fuse blown.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
Wing Jack Point Adapter—ICA009750
Parts Required
None
Aircraft System and Number
11—Landing Gear
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Check the “NOSE GEAR” or “MAIN GEAR” fuses by inspecting the Overhead Console for the desired blown fuse.
Figure 302. Fuses to Check on Overhead Console
2. If a blown fuse is found, proceed to replace the fuse. (Replace Overhead Console Fuses)
Verification Method
Retract and extend the landing gear to verify actuation of the landing gear.