ICON A5 MM : Landing Gear : Main Landing Gear : Maintenance Instructions : Main Landing Gear (MLG) Boot Removal
Main Landing Gear (MLG) Boot Removal
100415-00
Use this procedure to remove the MLG boot as part of the MLG boot replacement.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
11—Landing Gear
Safety Equipment
As Needed
Consumables
None
Note: 
During all boot replacement installation steps, do not actuate the brake system.
Task Instructions
1. Remove the MLG wheel and axle assemblies using the MLG Wheel and Axle Removal procedure. (Main Landing Gear (MLG) Wheel and Axle Removal)
2. Break the bonds between the leg and the boot and between the boot and the Seawings™. Slide the boot over the leg and caliper to remove.
Verification Method
Procedure is complete when the MLG boot has been completely removed.