ICON A5 MM : Instruments (and Avionics) : Instruments and Avionics General Maintenance : Remove Digital-to-Analog Converter (DAC)
Remove Digital-to-Analog Converter (DAC)
100761-00
Use the following procedure to remove the Digital-to-Analog Converter (DAC).
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
T15 Torx Driver
Parts Required
ICA011651 MULTIPLE SYSTEMS CONTROLLER
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the Right Instrument Panel Top Panel. (Right Instrument Panel Top Panel Removal)
2. Disconnect the five electrical connections going to the Digital to Analog Converter (DAC).
3. Remove the DAC by removing four 8-32 screws with a T15 Torx driver, two at top, and two at bottom of the DAC.
Verification Method
The DAC has been removed. See Install Digital-to-Analog Converter (DAC) to install the new DAC.