Remove Fuel Pressure Sensor
100504-00
These instructions should be used to remove the fuel pressure if it shows signs of a leak.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
None
Task Instructions
2. Turn fuel shutoff valve to the OFF position.
3. Disconnect D9036P on fuselage wire harness from PRESSURE SENSOR.
4. Remove PRESSURE SENSOR. Use backing wrench to hold the fuel pressure sensor adapter in place prior to loosening up the sensor. (Figure 285)
CAUTION:
Use a lot of rags to catch any liquid fuel from splattering around cockpit.
Figure 285. Fuel Supply Line, Subassembly
Verification Method
The task is completed when the fuel pressure sensor has been removed.
Parent topic