ICON A5 MM : Propulsion : Engine : Engine General Maintenance : Replace Oil Tank Overflow Hose
Replace Oil Tank Overflow Hose
100726-00
Use the following instructions to remove and replace the oil tank overflow hose.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
1 ft 5552K27 (TUBING, TYGON PLASTIC, FUEL & LUBRICANT, .375 X 500)
3804 (CLAMP, WORM DRIVE, MINI, .312 X .625)
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
F4TAPEBLACK as required (TAPE, SELF-FUSEING, SILICONE, .02 IN THK, 1 IN WIDE)
TY24MX as required (CABLE TIE, NYLON 6-6, 30LB, 5.50, TY-RAP)
Task Instructions
1. Remove currently installed hose clamp and tubing. (General Hose Removal)
2. Cut a length of Tygon® tubing to 11 ± .25 inches.
3. Install tubing onto oil tank overflow port as shown using hose clamp.
Verification Method
Tubing has been installed and hose clamp is secure.