ICON A5 MM : Propulsion : Engine : Engine General Maintenance : General Hose Removal
General Hose Removal
100734-00
Use as required to gain access and remove the affected hoses with the following general provisions.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Prior to removal, take note of original orientation/location/routing of the affected hoses, to ensure the same orientation/location/routing is maintained upon installation.
2. Take note of locations of zip ties and F4 tape to ensure they’re cut replaced/reapplied at the same location.
3. Cut, remove, and discard any cable ties.
4. Follow any task specific steps needed to remove hose.
Verification Method
Task is complete when the hose is properly extracted.