ICON A5 MM : Recommended Inspections : General Inspection Tasks : Cockpit Panels Removal and Installation : Seat Belt Inertia Reel Removal
Seat Belt Inertia Reel Removal
100566-00
Use this procedure to remove the seat belt inertia reel.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the seat belt reel cover by pulling on each corner to release retaining clips.
2. Use a 3/8 wrench to remove the 5/16-24 locknut and washer securing the seatbelt reel to the fuselage (for easier access to nut, pull seatbelt all the way out).
3. Remove the inertia reel.
Verification Method
The procedure is complete when the seat belt inertia reel has been completely removed.