Baggage Sidewall Panel Removal
100054-00
Use the following task to remove the baggage sidewall panel.
Applicable Aircraft Serial Number
00021+
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
05—Equipment and Furnishings
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the headliner. Push outboard on sidewall panel as necessary to remove headliner flange from sidewall panel U-channel. (Headliner Removal)
Figure 7. Baggage Sidewall Panel Removal
3. Use a T20 Torx driver and 3/8 wrench to remove the seat back closeout associated with the sidewall panel to be removed.
4. Remove the seat belt reel associated with the sidewall panel to be removed. (Seat Belt Inertia Reel Removal)
5. Use a small cross head screwdriver or similar tool to press the center of the plastic push-type fasteners in about 1/8 inch (don’t press too far or the center button will fall out the back side). Doing so will release the expansion feature of the fastener. There are four of these fasteners in each sidewall panel.
6. Remove sidewall panel from the aircraft.
Verification Method
The task is complete when the baggage sidewall panel has been completely removed.
Parent topic