ICON A5 MM : Recommended Inspections : General Inspection Tasks : Cockpit Panels Removal and Installation : Baggage Floor Removal
Baggage Floor Removal
100050-00
Use the following procedure to remove the baggage floor.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Use a T20 Torx driver to remove the six 10-32 screws, one at each corner of the two floors.
2. Remove the right floor, then the left floor, being careful not to lose the six associated spacers if they have come loose.
Verification Method
Task is complete when both right and left floors are removed.