ICON A5 MM : Recommended Inspections : General Inspection Tasks : Cockpit Panels Removal and Installation : Remove Seat Back
Remove Seat Back
100564-00
Use this procedure to remove the Seat Back.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
NA
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove Cockpit Sidewall Panel adjacent to the Seat Back to be removed. (Remove Cockpit Sidewall Panel)
2. Remove Baggage Floor adjacent to the Seat Back to be removed. (Baggage Floor Removal)
3. Use a T20 Torx driver and 3/8 wrench to remove the Seat Back Closeout behind the seat to be removed.
4. Use a 3/8 wrench to remove the two lower 10-32 bolts from Seat Back, one 10-32 bolt in the side of the Center Console and two 10-32 bolts from the outboard side of Seat Back.
5. Lift out the Seat Back carefully so as not to scratch paint or damage the Seat Belt.
Verification Method
After removing the Seat Back from the aircraft, the task is complete.