ICON A5 MM : Flight Controls : Yaw Controls : Maintenance Instructions : Adjust Rudder Pedal Rigging
Adjust Rudder Pedal Rigging
100027-00
Use this task to adjust the rudder pedal rigging.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
Digital level with 0.1° resolution and Alt Ref function, calibrated to manufacturer’s instructions.
Parts Required
None
Aircraft System and Number
06—Flight Controls
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. With the rudder pedals locked in the middle position, use a digital level to set the angle between the rudder arms and rudder rails to 90° ± 1°.
2. Remove MS21256-2 turnbuckle clip. Tension the rudder pedal cables to control the angle of rudder pedal arms using the rudder cable turnbuckles. Re-install MS21256-2 turnbuckle clip.
Verification Method
If the angle between the arms and rails can’t be set to 90° ± 1° by adjusting the turnbuckles, the control cables need to be re-rigged. Follow the process for re-rigging. (Rudder Pedals Remove and Redo)