Install Dome Light Switch
100332-00
Use the following task to install the dome light switch.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
A&P
Task Specific Training Required
No
Special Tools Required
None
Parts Required
R13-133A-01 (SWITCH, SPST, 30A)
Aircraft System and Number
03—Electrical System
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Install the new SWITCH, SPST, 30A into the overhead console frame and tighten with retaining nut. Torque to finger tight.
2. Connect wire labeled T9924 to the short post of the switch and T9926 to the tall post of the switch as shown in Figure 59.
Figure 59. Top View Down of Overhead Console
Verification Method
Turn the master switch on and verify that the dome light switch correctly controls the dome light.
Parent topic