ICON A5 MM : Equipment and Furnishings : Equipment and Furnishings General Maintenance : Left Instrument Panel Top Panel Installation
Left Instrument Panel Top Panel Installation
100396-01
Use the following procedure to install the left instrument panel top panel. This task is applicable to the Garmin 796 configuration only.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ME001106-NS796 (PAINTED, PANEL, IP TOP, LH)
AV467408-1 (AIR VALVE, DISC TYPE, 1.50)
Aircraft System and Number
05—Equipment and Furnishing
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Install left instrument panel top first by locating it in position carefully around the instrument cluster, then:
a. Install air vent hose and clamp.
b. Install 6-32 screw with washer under its head behind right eyeball air valve, torquing to 9 in-lbf.
c. Install 8-32 screws at left-forward side of and aft-right corner of panel, torquing each to 13 in-lbf.
2. Install right eyeball air valve using special tool (ITL001563 or equivalent). Torque to 30-50 in-lbs.
3. Install Throttle Handle and Bezel. (Throttle Handle and Bezel Installation)
4. Install the Center Console Bucket. (Center Console Bucket Installation)
5. Install the GPS in its mount.
Verification Method
The procedure is complete when the entire left instrument panel top panel has been fully reinstalled.