ICON A5 MM : Fuselage and Vertical Tail : Fuselage and Vertical Tail General Maintenance : Canopy Removal
Canopy Removal
100074-00
Use the following procedure to remove the canopy.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
08—Fuselage and Vertical Tail
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. With the canopy raised and supported, use a wrench to remove the eight AN4C6A bolts and 91950A029 washers that secure the ICA005811 canopy hinge weldment to the canopy frame. The bolts are threaded into blind nutplates. See Figure 180.
Figure 180. Blind Nutplates
2. Remove the canopy from the aircraft being careful not to scratch the canopy frame.
Verification Method
The task is complete when the canopy has been removed.