Right Instrument Panel Top Panel Installation
100546-01
Use this procedure to install the right instrument panel top panel. This task is applicable to the Garmin 796 configuration only.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
T15 Torx driver
#2 right-angle crosshead driver
Eyeball Vent Tool (ITL001563)
Parts Required
ME001107-NS796 (PAINTED, PANEL, IP TOP, RH)
AV467408-1 (AIR VALVE, DISC TYPE, 1.50)
Aircraft System and Number
05—Equipment and Furnishing
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Install right instrument panel top first by locating it in position, then:
a. Install air vent hose and clamp.
b. Install 6-32 screw with washer under it head behind right eyeball air valve, torquing to 9 in-lbf.
c. Install 8-32 screws at right-forward side of and aft-left corner of panel, torquing each to 13 in-lbf.
2. Install right eyeball air valve using eyeball vent tool (ITL001563 or equivalent). Torque to 30-50 in-lbs.
5. Install the GPS in its mount.
Verification Method
The procedure is complete when the right instrument panel top panel has been completely reinstalled.
Parent topic
Related tasks