ICON A5 MM : Instruments (and Avionics) : Low Fuel Level Sensor : Maintenance Instructions : Remove Low Fuel Level Sensor (00021-00109)
Remove Low Fuel Level Sensor (00021-00109)
100518-01
Use this procedure to remove the Low Fuel Level Sensor.
Applicable Aircraft Serial Numbers
00021-00109
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
ICA011920 (SENSOR, OPTICAL, DRY, 1/2-20, 12VDC)
TY24MX (CABLE-TIE, NYLON 6-6, 30LB, 5.50, TY-RAP)
Aircraft System and Number
10—Instruments (and Avionics)
Safety Equipment
As Needed
Consumables
LOCITITE 425 (THREADLOCKER, CYANOACRYLATE, LOW STR)
Task Instructions
1. Remove the Baggage Floor. (Baggage Floor Removal)
2. Remove the RH Seat Back. (Remove Seat Back)
3. Pump all fuel from Fuel Tank. (Pump Usable Fuel From Fuel Tank)
4. Remove 3X CABLE-TIEs along the Dry Optical Sensor wire.
Figure 296. Dry Optical Sensor Installation
5. Disconnect the Dry Optical Sensor wire from D9038P on the Main Fuselage Wire Harness.
6. Remove the DRY OPTICAL SENSOR from the Fuel Tank.
Verification Method
The procedure is complete when the Low Fuel Level Sensor has been removed.