ICON A5 MM : Flight Controls : Yaw Controls : Inspection Instructions : Inspect Rudder Pedal Rigging
Inspect Rudder Pedal Rigging
100269-00
Use task to inspect the rigging of the rudder pedals to the rudder rails.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
None
Special Tools Required
Protractor or inclinometer
Parts Required
None
Aircraft System and Number
06—Flight Controls
Safety Equipment
As Needed
Consumables
None
Task Instructions
1. Remove the floorboard panels from the aircraft by pulling upward on them. (Remove Cockpit Floorboard)
2. With the rudder pedals locked in the middle position, check angle between rudder rails and rudder pedal arm weldments using a protractor or inclinometer.
Verification Method
The measurement should be 90°± 1°. If not within this specification, refer to the rudder pedal rigging adjustment procedure. (Rudder Pedals Remove and Redo)