ICON A5 MM : Fuel System : Fuel Pump : Maintenance Instructions : Install Fuel Pump
Install Fuel Pump
100341-01
Use this procedure to install the Fuel Pump.
Applicable Aircraft Serial Numbers
All
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
NAS149C0432R (WASHER, FLAT, CRES, .250X.032, PSVT)
ME000655 (FUEL PUMP, ROTAX, ALTERED)
Aircraft System and Number
07—Fuel System
Safety Equipment
As Needed
Consumables
LOCTITE 243 (THREADLOCKER, PRIMERLESS, OIL TOL, REMOVABLE MED STR, BLUE)
Task Instructions
Note:
If required, AN fittings can be installed onto fuel pump prior to installation on floor support bracket. Verify AN fittings are clocked correctly with fuel pump mounted in place before torquing.
1. Connect D9087P connector to Main Fuel Pump.
2. Connect D9100P connector to Auxiliary Fuel Pump Connector.
3. Install the Fuel Pump onto Baggage Floor Support Bracket. (Figure 167)
4. Apply the THREADLOCKER to Fuel Pump studs and install 4x WASHER and 4x M6 nuts previously removed. (Figure 168) Torque to 30-35 in-lbs.
Figure 168. Fuel Pump Looking FWD, LHS
5. Ensure threads on the fuel lines are clean. Remove any plugs.
6. Connect the AN-6 Fuel Pump Inlet Fitting onto the Fuel Pump Inlet. (Figure 168) Torque fitting to 110-130 in-lbs.
7. Connect the AN-6 Fuel Pump Outlet Fitting onto the Fuel Pump Outlet. Connect fitting to Feed Line. Torque both ends of fitting to 110-130 in-lbs.
8. Turn on Fuel Shutoff Valve and Aircraft Master Switch. Turn ignition key to position-A to verify that the Main Fuel Pump is running. Turn ignition key to position-B to verify that the Auxiliary Pump is running.
9. Check for leaks.
10. Install the Seat Backs. (Install Seat Back)
11. Install the Baggage Sidewall Panels. (Baggage Sidewall Panel Installation)
12. Install the Baggage Floor. (Baggage Floor Installation)
Verification Method
The procedure is complete when the Fuel Pump is installed and working with no leaks.